SUPER BEAK TRIMMING ATTACHMENTS
BEAK SUPPORTS, ATTACHMENT U BRACKET
STANDARD BEAK SUPPORT
A solid support with indented bottom for strength can be used with any straight cutting edge blade. Supplied standard on all Super Beak Trimmers.
|
RX2 W/Rollers
Drive Rod Supports - Each
Catalog #: 120-002
|
1-888-LYON USA
1-619-216-3400 |
 |
| WATER COOLD STANDARD |
Catalog #: 120-140 |
|
|
| REINFORCED STANDARD BEAK SUPPORT |
Catalog #. 120-003 |
1-888-LYON USA
1-619-216-3400 |
 |
FLAT BEAK SUPPORT
Has flat beak area, preferred by many.
For beak trimming.
Also for toe clipping using a Type K, KH or H Blade. |
Catalog #. 120-001 |
1-888-LYON USA
1-619-216-3400 |
 |
| WATER COOLED FLAT BEAK SUPPORT |
Catalog #. 120-143 |
1-888-LYON USA
1-619-216-3400 |
 |
| REINFORCED FLAT BEAK SUPPORT |
Catalog #. 120-144 |
1-888-LYON USA
1-619-216-3400 |
 |
"U" BRACKET FOR ATTACHMENTS
A universal bracket used on all attachments except the BHT and MN2. Any gauge shown as optional in this can be used with this bracket. |
Catalog #. 120-008 |
1-888-LYON USA
1-619-216-3400 |
 |
| U BRACKET FOR BHT ATTACHMENT |
Catalog #. 120-010 |
1-888-LYON USA
1-619-216-3400 |
|
| U BRACKET FOR MN2 ATTACHMENT |
Catalog #. 120-012 |
1-888-LYON USA
1-619-216-3400 |
 |
| Back To Top |
6-10 DAY PRECISION BEAK TRIMMING OF LAYER CHICKS & BREEDERS
Precision beak trimming of 6-10 day old layer chicks, developed by Dr. E.L. Bramhall, Farm Advisor, University of California has become a very popular method. Properly done, it is usually unnecessary to retrim during the bird's layer life. A power unit with the proper cam MUST be used in order to deliver a timed 2+ seconds of cauterization required to inhibit beak regrowth. The attachments shown are especially developed for Precision beak
trimming and come complete with procedural instructions.
BP PRECISION BEAK TRIMMING(waterless)
Consists of BP 3-hole gauge and BC Blade with "U" bracket. For use with Precision Power Unit.
|
Catalog #. 940-012
1-888-LYON USA
1-619-216-3400 |
 |
 |
B PRECISION BEAK TRIMMING
Consists of "U" bracket, type B water cooled gauge. hose, regulator and BC Type Blade. |
Catalog #. 940-011
1-888-LYON USA
1-619-216-3400 |
 |
 |
| Back To Top |
BEAK-HEAT-TREATING ATTACHMENT FOR BROILERS
BHT, BEAK-HEAT-TREATOR ATTACHMENT
For upper beak removal of broilers by the beak-heat-treating method. Also used for day old duck beak trimming. Consists of "U" bracket with adjustable screws for height, adjustable water cooled beak support, hose, regulator and IRXW Blade.
|
Catalog #. 940-006
1-888-LYON USA
1-619-216-3400 |
 |
 |
BHT-A-KIT
Same as BHT with IRXW Blade. |
Catalog #. 940-007
1-888-LYON USA
1-619-216-3400 |
|
|
MN BEAK HEAT TREATING ATTACHMENT
Type MN Attachment for Mike's Notching set-up, developed by Mike Aglio for Arbor Acres Farms, Consists of MN bracket, BHA Blade height adjustor and MN2 Blade. |
Catalog #. 940-008
1-888-LYON USA
1-619-216-3400 |
 |
 |
| Back To Top |
OPTIONAL GAUGES FOR PRECISION BEAK TRIMMING
Day old Beak-Heat-Treating (searing) is probably the most common method of beak trimming broilers. In this method, the top curved surface of the upper beak is touched to a hot blade. After the bird has learned to eat and drink the beak tip drops off, presenting no problems. Properly done, this method usually suffices until market time. In addition to flat blades (BC, IRXW), curved blades to sear a notch in the upper beak can be used
(DL, DLX, LD, plus DL2 and MN-2 for beak trimming 2 birds at once).
BPX GAUGE, WATERLESS
(USE WITH U BRACKET 120-008)
|
Catalog #. 120-023
1-888-LYON USA
1-619-216-3400 |
 |
 |
BPX GAUGE, WATER COOLED
|
Catalog #. 120-035 |
1-888-LYON USA
1-619-216-3400 |
 |
| B11 GAUGE, WATERLESS |
Catalog #. 120-024
1-888-LYON USA
1-619-216-3400 |
 |
 |
| B11 GAUGE, WATER COOLED |
Catalog #. 120-036 |
1-888-LYON USA
1-619-216-3400 |
 |
| EURO GAUGE, WATERLESS |
Catalog #. 120-250
1-888-LYON USA
1-619-216-3400 |
 |
 |
| EURO GAUGE, WATERLESS |
Catalog #. 120-251
1-888-LYON USA
1-619-216-3400 |
 |
 |
| Back To Top |
UPPER BEAK REMOVAL ATTACHMENT FOR CHICKS, BROILERS & GAME BIRDS
UPPER BEAK REMOVAL: Developed by the famous Indian River Farms, the IR Type attachments are widely used for day-old beak trimming of broilers. In this method, the upper beak is inserted in the small hole, the lower beak in the large one. The upper beak is then cut and cauterized. This method usually suffices to disarm the bird until market time. Although the IR Attachments were developed for broilers, additional gauges have been developed which are widely used by game bird growers to beak trim quail, pheasants, etc. whether they are grown as meat birds or until they
are released, as the beak will grow back in 8-10 weeks unless further or more pronounced beak trimming is done.
IR UPPER BEAK REMOVAL ATTACHMENT
Consists of "U" bracket, IR8 water-cooled gauge, IR9 waterless gauge, hose, regulator and BC Blade |
Catalog # 940-014
1-888-LYON USA
1-619-216-3400 |
 |
 |
IR UPPER BEAK REMOVAL ATTACHMENT
Consists of "U" bracket, 2 IR8 waterless gauge, and BC Blade |
Catalog # . 940-015
1-888-LYON USA
1-619-216-3400 |
 |
 |
IR-GB GAME BIRD ATTACHMENT
Consists of "U" bracket, IR6 water-cooled gauge for quail, IR7 waterless gauge, hose, regulator and BC Blade |
Catalog # . 940-016
1-888-LYON USA
1-619-216-3400 |
 |
 |
| Back To Top |
OPTIONAL GAUGES FOR UPPER BEAK REMOVAL (Use with U bracket 120-008)
| IR6 GAUGE, WATERLESS |
Catalog # . 120-027
1-888-LYON USA
1-619-216-3400 |
 |
 |
| IR6 GAUGE, WATER COOLED |
Catalog # . 120-020
1-888-LYON USA
1-619-216-3400 |
|
|
| IR10 GAUGE, WATERLESS |
Catalog # 120-028
1-888-LYON USA
1-619-216-3400 |
 |
 |
| IR10 GAUGE, WATER COOLED |
Catalog # . 120-038
1-888-LYON USA
1-619-216-3400 |
 |
|
| No. 11 GAUGE, WATERLESS |
Catalog # . 120-037
1-888-LYON USA
1-619-216-3400 |
 |
 |
| No. 11 GAUGE, WATER COOLED |
Catalog # . 120-037
1-888-LYON USA
1-619-216-3400 |
 |
|
| Back To Top |
TOE & WING CLIPPING
B11T CLIPPING ATTACHMENT
Toe clipping has become a widespread practice with turkey producers and more recently, broiler producers. It eliminates the problem of back ripping prevalent in some bird strains. The B11T Attachment cuts and cauterizes in a shearing action. Double acting power units are usually used with this attachment to obtain high production rates of toe clipping. The attachment is also used for wing cutting. Comes complete with instructions on toe clipping and marking. |
Catalog # 940-005
1-888-LYON USA
1-619-216-3400 |
 |
 |
| Back To Top |
ATTACHMENT -FOR CONVERSION OF SUPER BEAK TRIMMER TO SUPER TT BEAK TRIMMER
TT ATTACHMENT
This attachment will convert your Super Beak Trimmer into a TT Beak Trimmer. TT method of beak trimming offers a different approach as the bird is held sideways at a 90˚angle from the unit and both beaks are cut and cauterized simultaneously with an inward slant as shown in drawing. Recommended for birds 3 to 6 weeks of age. |
Catalog #. 940-024
1-888-LYON USA
1-619-216-3400 |
 |
 |
|
